Atlantic Air specialise in design, installation and commissioning of mechanical ventilation with heat recovery.
Our team of skilled engineers have experience in all types of installation, from single unit whole house heat recovery ventilation to large scale commercial air handling units.
We can provide a high quality, energy efficient ventilation system that is tailored specifically to your needs. Based in Co. Tyrone in Northern Ireland, we are able to design, install and commission mechanical ventialtion with heat recovery all over Ireland.
As independent MVHR installers (Mechanical Ventilation with Heat Recovery), we are not contracted to any specific manufacturer or model. We are committed to sourcing the most up to date, energy efficient heat recovery ventilation system currently available on the market, one that is SAP Appendix Q listed and Energy Saving Trust best practice compliant.
We recommend installing MVHR units with in-built cross counter-flow heat exchangers. The heat exchange efficiencies are much higher (up to 90%) and the operating costs are much lower (0.4 W/l/s) compared to that of cross-flow or rotary wheel heat exchangers. A cross counter-flow heat exchanger transfers heat from one air-stream to another. At its core is a stack of plastic plates, within which are a series of airflow channels. These channels are aligned precisely to ensure that heat from the extracted warm is transferred to the cooler incoming supply air. Unlike a rotary heat exchanger, a cross counter-flow heat exchanger does not exchange humidity and there is no risk of mixing the air-streams. It is typically used in buildings where hygienic standards require that both air streams are kept completely separate from one another.
This technology is designed to deal with large volumes of warm moist air, thus enabling us to position extract air valves directly over shower enclosures. By extracting steam at its most intense point we can dramatically reduce condensation levels whilst recover the highest possible temperature from the warm air before extraction to the outside.
It is important to remember that the heat exchanger is only one part of the entire ventilation system. Choosing the correct ducting and installing it properly will significantly improve the performance of any heat recovery ventilation unit, regardless of the type of heat exchanger selected.
The reason being; warm air extracted from a wet room (e.g. kitchen, bathroom etc.) must travel through the ductwork to reach the heat exchanger. Fresh incoming air passing through the heat exchanger must travel through the ductwork before terminating in a habitable room (e.g. living room, bedroom etc.) If this ductwork has been poorly insulated, little to no heat energy will be recovered. Careful consideration should be given to the location and positioning of ductwork so as to limit airflow restriction. By limiting restriction, the fan motors can run slower, hence the power consumption will be reduced. We recommend installing rigid thermal ducting throughout non-conditioned areas and rigid PVC ducting within the heated envelope.
All our systems are designed and installed in-house by our team of expert engineers. We will undertake a walk-through survey of your home prior to installation. This will enable us to identify any deviations to plan drawings and adjust our design to facilitate them. This process also allows us to make note of the likely positioning of furniture e.g. beds, sofas, dining tables etc. so that we can position supply and extract air valves accordingly.
All of our MVHR units have a full 5 year manufactures warranty on parts and a full 1 year manufactures warranty on labour. All ductwork installations undertaken by Atlantic Air have a full 5 year warranty on parts and labour.
Customer details (e.g. unit type, filter type and filter replacement date) will be added to the Atlantic Air filter cleaning and replacement database. A notification e-mail or text will be sent to the homeowner/ occupier them to clean filters after 6 months of use. A further email or text notification will be sent to the client reminding them to replace filters after 12 months of use. Replacement filters can be purchased directly from us or the MVHR unit manufacturer.
Atlantic Air are a top notch company who know their stuff!!! They are so helpful in explaining what EPCs. SAP, Air Tightness and MVHR systems actually are, to those of us out there who only know it is a requirement we need for our new homes.Top notch service and great people!! Will definitely refer your services onwards.
Their Professional, friendly service is second to none, nothing is too much trouble, a great team, thankyou.
We found Atlantic Air to provide an excellent service from start to finish. From first contact advice on what to do prior to install was very helpful and the Atlantic team were on hand to answer all questions we had. Having priced other heat recovery systems we found them to be very competitive with an install that integrated well to our overall build
or
